Civil / Environmental Engineers

 
Home | Civil/Environmental engineerin | Earthwork/grading engineering | Erosion control engineering | Soil/Groundwater environmental | Storm/Flood engineering | Surveying & Geomatics | Traffic Engineering | Waste disposal & treatment
  Position:HOME>Water treatment & distribution>Article Content
Well water sampling requirements
Source:Internet Author:Unknow Pubdate:2008-11-02  
jpkers (Mechanical) 14 Oct 08 12:14
HI
Im currently trying to find out what rountine and initial sampling will be required for the extraction of well water and using it to flush toilets only, (no domestic use basins etc), located in central london, and the well is probably 30ft down, i also need to know which regulation you are working to as i will need to justify to customer, i had thought tvc's coliforms e.coli legionella turbidity something along those lines, thank you   

thewellguy (Electrical) 21 Oct 08 13:58
Check with the local governing body.  In the U.S. it would be the EPA or the local health dept.  Also you could check with a local drilling contractor, they should be aware of the codes.

belowzero (Mechanical) 31 Oct 08 9:33 字串7
Your local public health authority are responsible for this i.e. local council. They may do a free test for you if you indicate it 'could' be for consumption, then you will know.
B

cvg (Civil/Environme) 31 Oct 08 12:54
generally there are not requirements for water quality when used to flush toilets.  Grey water from sinks is often used without treatment (except perhaps minimal filtering).  From a practical standpoint, send a sample to the lab and have them do a standard test assuming it would be used for potable water.  This will give you more than you need for your application.

gerhardl (Mechanical) 2 Nov 08 11:10


At least back leakage protection to clean drinking  water pipelines or possible contamination of such lines after EN rules have to be provided or guaranted.

字串4



That means either complete separate lines, or if cross connection with clean lines is unavoidable (if any way possible: avoid!) full allowed pressure controlled checkvalve protection would be a minimum.

If separate lines: all answers above will apply.

(Click:

Previous:New C900 Pressure Classification   Next:Is Ro plant requried - before sending the water to cooling tower
[Add TO Favorites] [TOP] [PRINT] [CLOCE WINDOWS]  
  Hot Article
·Fire hose flow rate
·Langelier Index
·Galvanised Mild Steel Pipe
·HIGH CHLORIDE WASTEWATER
·Sealants & backstop water
·Pipe and Pipe Fitting Dimensio
·Selexol Solvent Process
·Is Ro plant requried - before
·Bulk Water Truck Filling Stati
·Hydraulic Grade Line Conversio
·CO2 Sparging pH Neutralization
·Pipeline isometrics
  Related Articles
·Is Ro plant requried - before
·Antennas, Elevated Water Tanks
·Guarding pipes from Tree Roots
·HDPE Hydrostatic Pressure Test
·Baffle Design
·Membrane Bioreactor Design
·Measuring flow and pressure
·Ground Water Tank Design
·Selexol and Wastewater H2S and
·K Value for Wafer Check Valve?
·wall pipes vs. sleeves
·VFD Pumps
Power by DedeCms